A Swivel Coupler typically connects Scaffold Pipes at varying angles. An assembly such as the removable “T” bolt allows for replacement if there is damage to threads. Swivel coupler are available in both Pressed Steel & Drop Forged.

A Double Coupler connects Scaffold Pipes at right angles only. This coupler is also available both in pressed and drop-forged version.

Sleeve coupler wraps around the ends of scaffold pipes in order to join them. A steel plate is in the center equal sections of the pipes are held together. This coupler is made of pressed steel only.

Putlog Coupler is used to join two scaffold pipes at right angle without keeping any gap between them.

This coupler connects scaffold pipes to steel sections like H-Beams and I-Beams.

This fixture excels at connecting soldiers to timber.

A BRC is used to fix scaffolding wooden boards with ledgers and transoms.

This fixture connects soldiers to Aluminium wailers with a “T” bolt and nut mechanism.

When used in conjunction with a sleeve coupler, this pin connects pipes internally in a secure manner.

Generally in 6m lengths, tie rods can be cut into required sizes. When a wing nut is run through the latter, it ensures dirt, dust, concrete and rust is removed.

These plates distribute the load of a threaded fastener (screw or nut). It can also find use as a spacer, spring, preload indicating device, locking device, wear pad, and to reduce vibration (when used in rubber). Here, the outer diameter is double the width of the inner diameter.

The Wing Nut has a hexagonal head that allows a spacer to tighten it whereas the wings facilitates the use of a hammer or reinforcing bar to tighten or lever it. The Wing Nut can be self-colored, galvanized or electroplated.

The main purpose of a Water Stopper is in water-tight structures like water tank walls where through ties are not possible. This item cannot be reused as concrete is poured onto it. The stopper has an impermeable core and flange.

Shuttering clamps have their main use in shuttering of scaffolding in construction, building and engineering. It is usually available in two sizes, i.e., 3’ and 4’.